• +38 (096)-341-15-77
}

Заказать в Киеве и по всей Украине

Хаммам, бани под ключ

Многолетний опыт и высокое качество проектирования и строительства бань и хаммам.

Construction of hammams

A hammam is a Turkish bath. Despite the fact that the construction of hammams has more than 1 thousand years, they are still popular.

Features and principle of operation. The main feature of the hammam is that, unlike the Finnish sauna, it is not dry, but a steam bath. The principle of operation is to maintain a relatively small temperature (30-50 degrees) and one hundred percent humidity. Also, unlike the usual Russian bath, the floor and walls of the hammam are finished with stone and marble. From the same material are made and beds in the hammam, which are well heated flat stones, which are located in the center of the room bath.

Designing a hammam: The foundation of everything.

Before construction begins, everything must be carefully planned out. The size of the hammam will depend on the number of people who will be visiting it at the same time. When building a hammam, it is important to provide a technical room where the equipment will be located.

It is also necessary to provide for the outputs of all engineering communications - sewerage, water, ventilation. It is desirable that before starting the construction of a hammam, there was already a ready-made project, with cutouts of walls and dome and competent wiring of communications.

Designing a hammam: The foundation of everything.

Before construction begins, careful planning is essential. The size of the hammam will depend on the number of people who will visit it at the same time. When building a hammam, it is important to provide a technical room where the equipment will be located.

It is also necessary to provide for the outputs of all engineering communications - sewerage, water, ventilation. It is desirable that before starting the construction of a hammam, there was already a ready-made project, with cutouts of walls and dome and competent wiring of communications.

Domes and arches: the symbols of the hammam

A domed ceiling is not only beautiful, but also functional. It provides a neat drainage of condensate, preventing "rain" inside the room. Around the perimeter, usually at the eaves, there is a drip tray to receive condensate.

The walls, floor and dome of the hammam are made of construction panels-Wedi, Botament, Wim Platte. The floor, seats and part of the wall are always heated and are divided into three different circuits. The benches, floor and walls are heated at different temperatures, depending on the tactile preferences of the customer. Recently, heating is done with electric wires, like a warm floor. But it is possible to heat surfaces and water pipes.

The main equipment of a hammam is a steam generator.

The choice of steam generator is a key moment. It is necessary to choose correctly not only the firm of the steam generator manufacturer, but also to choose the right model of the steam generator. Selection of a steam generator depends on the volume of the hammam. The number of steam nozzles depends on the volume. Usually to the steam generator is added aroma pump, aroma dispenser. It is this equipment paired with the steam generator that creates a unique hammam atmosphere. Additional equipment depends on the customer's wishes. It is possible to connect an additional salt generator, steam blast and audio speakers.

Finishing: the finishing touch.

Finishing works give the hammam a rich and regal look, creating a unique atmosphere. Mosaic, marble, porcelain stoneware or onyx - the choice of materials for finishing is huge. Our company produces mosaic masterpieces that make the hammam exceptional.

 

Health benefits. Visiting a hammam has a beneficial effect on human health, as it opens pores and withdraws toxins with excess fluid, restores the water-salt balance in the whole body.  Hammam helps to get rid of excess weight, toxins and toxins. And also gives a pleasant sensation of warmth and calms the psyche.

Our company has been building hammams for more than 15 years. Our team will quickly and efficiently create a concept of hammam, select equipment, and perform turnkey construction of hammam.

If you need a consultation or calculation of the hammam, please contact us. You can fill in the feedback form or order a callback.

Сауны и хаммам

Комания Aspar Group уже много лет успешным образом занимается проектированием и строительством хаммам, бань и саун. Производство бань саун под ключ является одной из главной сфер деятельности нашей компании. У нас есть много лет опыта и все необходимые практические навыки в сфере строительства банных комплексов, поэтому мы в кратчайшие сроки обеспечиваем их сооружение, соблюдая при этом необходимые нормы безопасности.